BENETEAU Oceanis 46.1

The Oceanis 46.1 boasts all the features of a large cruising yacht, with a rare balance between elegance, usable space and performance. Her stepped hull opens up an incredible amount of space inside and yet her seakeeping performance is still impressive. A large number of clever customizable fittings make her easy to sail and pleasantly comfortable.

Exterior design

The Oceanis 46.1 is based on a Finot-Conq plan, keeping the distinctive stepped hull of the 51.1. Apart from her performance at sea and the huge amount of space that set this boat apart, this architecture makes optimal use of the cockpit beam. An incredibly efficient deck plan makes her wonderfully safe and easy to use. The furling mast, self-tailing jib and all the halyards and sheets brought back to a single winch at each of the helm stations, make manoeuvring simple when short-handed sailing.

Interior Design

Large hull portholes bring a considerable amount of natural light right into the centre of the boat, so that you can truly enjoy the elegant interiors by Nauta Design. A choice of satin light oak or mahogany set the tone and create the interior atmosphere, which can be readily customized.

Every Style of Cruising

Easy to sail, easy-going and fast, the Oceanis 46.1 can be customized to make her unique, appealing to a wide range of crews. Attention to design details makes life on board a real pleasure and you can sail confidently in the knowledge that she is safe.  

  • Length Over All : 47′ 11″
  • Hull Length : 44′ 9″
  • Hull Beam : 14′ 9″
  • Light displacement : 23,356 lbs
  • Fuel tank capacity : 53 gal.
  • Fresh water capacity : 98 gal.
  • Max Engine Power (Hp) : 57 hp
  • CE Certification : A10 / B11 / C12
Contact Us about the Oceanis 46.1 Sailboat
CONSTRUCTION ____________________________________
• Design made following European Directive requirements and according to CE certification
• Monolithic polyester contact hull
• Monolithic contact structural counter mould (Fabric – resin) bonded to the hull
• Injected deck construction in glass fiber and Saerform foam sandwich, covered with non-slip diamond pattern
• Cast iron keel fixed with bolts and stainless steel backing plates
• Twin rudders affixed with stainless steel stock
• White hull – Grey metal hull decoration
• 8 Hull portholes
DECK EQUIPMENT___________________________________
• Anodized aluminium mast, deck stepped with in-mast furling system, 2 Aft swept spreaders
• Anodized aluminum boom
• Cathedral type single-strand stainless steel standing rigging
• Split backstay
• Rigid boom vang
• Self-tacking jib with on-deck furler
• 2 Stand Up mainsheet blocks on the coachroof
• 1 Self-tacking jib track with traveller
• All lines lead back to the helm stations (except boom topping lift and genoa halyard)
• Complete running rigging: Main halyard, Genoa halyard with cleat on mast, Boom topping lift with cleat on mast, Mainsheet, 1 Self-tacking jib sheet
•6 Clutches
• Halyard covers
• 2 Flag halyards
• 1 Self tailing winch (H40.2 STA) at each helm station
• 1 Aluminium Speed Grip winch handle
• 2 Winch handle holders
• Furling mainsail Dacron, with UV protection Natural, horizontal cut,
• Self-tacking jib Dacron with UV protection Natural, horizontal cut
• Self-draining chain locker – Clench bolt – Hatch cover
• Single roller stainless steel bow fitting with offset roller
• 12 V – 1 000 W vertical electric windlass – Remote control
• 6 Aluminum mooring cleats, Length: 400 mm /15 3/4’’ – Stainless steel chafing plate
• Access by polyester cover, Passage width: 65 x 50 cm / 2’2’’ x 1’8’’
• Stainless steel ladder
• Shelving unit
• 1 Open stainless steel pulpit
• 2 Stainless steel aft pushpits
• 2 stainless steel handrails on coachroof
• 1 Ring lifebuoy bracket
• Welded ring on pushpit for flag
• Double life lines and stainless steel stanchions, 650 mm / 2’ 2’’
– Side boarding gate on either side
• Emergency ladder on pushpit
• Self-bailing cockpit
• 1 Watertight compartment under cockpit benches & 1 Wet locker
• 1 Locker in cockpit bottom
• 1 Gas compartment under port helmsman seat
• Natural solid wood slatted cockpit benches
• Solid wood slatted helm seats with starboard storage locker
• Foldaway helmsman foot chock
• 2 Steering wheel consoles: Stainless steel steering wheels (900 mm diameter / 2’11’’) – Anthracite leather covering – Steering gear at the helm station – Steering line transmission system – Stainless steel handrail
• 2 Deck accesses for emergency tiller
• 1 Emergency tiller
• 1 Steering compass on the cockpit table
• Engine throttle and control panel on starboard
• Cockpit table, stainless steel support, 2 wooden flaps, lighting, 4 cupholders, stainless steel handrail, BIB storage
• 1 Cockpit shower with mixer tap
• 1 PMMA companionway door in 2 removable parts – Sliding hatch made of PMMA
• Fully opening transom, convertible into swim platform (2,65 m x 0,80 m/8’8’’ x 2’7’’)
• Intermediate cockpit access step
• Manual control opening
• Natural solid wood decking on swim platform
• 1 Stainless steel, removable bathing ladder with dedicated stowage in the cockpit
INTERIOR __________________________________________
• Alpi Mahogany wood interior
• Parquet type laminated floors
• Interior cushions in cloth
• Padded lining in salon (Beige)
• Mattresses in the cabins, HR35kg/m³ foam